For Sale: General Electric LM2500 Gas Turbines

Dear Sir

We can supply 3 PCS General Electric LM2500 Gas Turbines without alternator in excellent condition very low Running Hours.  Each is 22.2 MW at 3600 RPM

If anybody interested it please don t hesitate to contact with us....
BEST REGARDS
BURAK ALDEMIR

The GE LM2500 is a Reliable Source for Power

The GE LM2500 from General Electric is an industrial and marine gas turbine made by GE Aviation and is derived from the GE CF6 aircraft engine.

It power thrust is extremely efficient. The current version of the GE LM2500 is capable of delivering 33,600 shaft horsepower along with a 37 percent thermal efficiency at ISO conditions. It is commonly found in marine vehicles such as U.S. Navy warships, hovercrafts, cruise ships, hydrofoils and ferries that run fast. More than 29 international navies employ the GE LM2500 and more than 1,000 of the GE Turbines have been in service since 2004.

The GE LM2500 is uniquely built and consists of a gas generator, attached fuel pumps, a power turbine, lube oil pumps, a speed governing system, an associated inlet and exhaust sections, a fuel control, lube and scavenge systems, and has controls that start and monitor engine operations. Another aspect about these marine and industrial gas turbine machines is that they are easy to install and maintain. That alone makes them cost-effective and many companies find this an appealing factor in purchasing the turbines. They have a simple, modular design with marine corrosion-resistant materials and are constructed with the smallest size, weight and space requirements for every horsepower produced. Since the GE LM2500 is housed in a high-shock resistant, thermal acoustic enclosure, the noise is reduced in the engine room and sensors can also detect and icing or fire breakouts. In addition, fire extinguisher equipment is also housed in the enclosure. Its size lends itself to maximizing shipboard maintainability and cutting down on parts replacement, which will save any entity money on repair costs.

Some other specifications concerning the GE LM2500 include a heat rate of 6,860 shp-hr (shaft horsepower per hour), an exhaust gas temperature of 1,051°F, an exhaust gas flow of 155 pounds per second, a power turbine speed of 3,600 RPMs, weigh about 10,300 pounds, are 6.52 meters in length, and are about 2.04 meters in height. Some other unique features about the GE LM2500 are:

• Qualified by the ABS, NRV and U.S. Navy
• Have improved HP turbine cooling
• Come with hot section material upgrades
   

  GE Turbines Provide Innovative Solutions for Power Production

  Some of the most respected and well-known turbines are the GE turbines. The gas GE turbines can operate in severe climate conditions and in remote locations, where it is difficult for repair workers to reach them. This means the inlet systems need to be optimized and GE has dedicated to development of reliable gas turbine inlet systems. Now, inlet filters are provided throughout the world to protect GE turbines in all kinds of environments.

  The aero derivative gas GE turbines is perfect for covering your needs for outputting power ranging from 13 to 100 MW and can also use a variety of fuels. It can get on the grid fast with quick starts and load following and is highly reliable in keeping your power supply online. The aero derivative gas GE turbines come in a modular package that allows for shorter manufacturing cycles and quicker installation at a reduced cost. They are cheaper to install then the regular field units. GE turbines are tested thoroughly after assembly and are ready to go into operation upon arrival. This also assists with lowering the installation cost and keeps projects on schedule. They also provide low emissions, have advanced design procedures, offer modern manufacturing technology, and are available with fast, easy modular maintenance programs.

  If you need heavy duty gas GE turbines, there are many available ranging from 11 to 340 megawatts. Almost 7,000 heavy duty GE Power Generation machines have been installed worldwide, the largest base for gas turbine suppliers. They have more than 200 million fired hours of operating experience and offer a wide variety of technological options that meet challenging energy requirement. These GE turbines are time-tested and proven performers that offer reliability in power generation and industrial application. Their portfolio includes F class turbines and medium size B and E class turbines that are used for simple, combined cycle applications.

  There are also small heavy duty gas GE turbines that equally as flexible with low emissions and higher efficiency over wide operating ranges. Combining this with long-life construction is a recipe for lowering cost significantly. In addition, onsite maintenance or shop maintenance (at an authorized location) is available for compact and versatile package arrangements.

  If you need industrial gas turbine solutions from GE, BTU Solutions can make them available to you. We have trained technicians who can install GE turbines quickly and efficiently without raising the installation cost. We also have popular GE turbines in stock such as the GE LM2500 and the GE